STYCCOBOND F3 is a professional-grade, water-based textile flooring adhesive designed to deliver excellent wet grab and early strength build-up. Suitable for a wide range of carpets and underlays, it provides a secure and durable bond, making it a trusted solution for commercial and residential installations.

Key Features

• High-strength bond with excellent wet grab performance
• Suitable for most carpets, contract underlays, and cork tiles (up to 3.2mm)
• Compatible with underfloor heating systems
• Approved for marine use (IMO FTP Code compliance)
• Low-odour, water-based formulation for safer indoor environments

Recommended Applications

Ideal for bonding:

• Fibre-bonded carpets
• Hessian and felt-backed carpets
• Secondary latex and rubber foam-backed carpets
• Contract underlays
• Cork tiles up to 3.2mm thick

Subfloor Compatibility

Can be applied to:

• STOPGAP smoothing compounds
• Concrete and sand/cement screeds
• Calcium sulphate screeds
• Plywood, chipboard, hardboard
• STOPGAP waterproof surface membranes
• Sound flooring-grade asphalt and some non-absorbent surfaces (with suitable priming)

Technical Information

• Colour: Cream/Yellow
• Consistency: Viscous liquid
• Open Time: Up to 15 minutes (depending on site conditions)
• Coverage:
  • Up to 3m² per litre (2mm x 6mm V-notch trowel)
  • Up to 1.5m² per litre (3mm x 6mm V-notch trowel)

Available Pack Sizes

• 2.5 Litre Bucket
• 5 Litre Bucket
• 15 Litre Bucket

Note: Coverage rates vary depending on subfloor absorbency and trowel size. Always ensure correct subfloor preparation for best results.

Technical Data Sheet